WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.govThe following should be conducted by a qualified technician:
- Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
- Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this but consult a qualified technician if necessary).
- Check the thickness of your brake pads.
- Inspection of the brake hoses for brittleness or cracking.
- Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
- Inspection of wheel bearings and grease seals.
- Parking brake adjustments (as needed).
The following inspections and maintenance procedures can help prevent potential brake problems:
- Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
- Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- A low or sinking brake pedal
- Vehicle pulls to the left or right when brakes are applied
- Brake pedal pulsation (not to be confused with normal ABS operation)